How Secure is Your Outdoor Laser Level?

One of the most asked questions about outdoor laser levels is how secure are they? Even the best laser level for outdoor use must be secured against external damaging elements like water, dust, and wind, if not, the laser level may pack up the same day you start using it. Today, the commonest way people determine how secure their laser levels are is the presence of IP56 or IP66 water and dust-resistant features in the design of their laser levels.

Useful Link: Best Laser Level For Exterior Work - Outdoor Laser Level Reviews

How Secure Is Your Laser Level in Daylight?

In addition to water, dust, and wind, you should be aware of how secured your device is in broad daylight with stable environmental conditions. Most laser-level users worry about the visibility of their devices, especially under intense sunlight. Unfortunately, there are no laser levels with full visibility outdoors, but green laser levels are brighter than red lasers and you can still use a laser receiver to detect and measure distance covered by your laser level.

You may also want to adjust your laser level setting to scan line mode to boost visibility. When it comes to security, it is a completely different story. Some laser levels may go heated quickly inside the scorching sun; hence you may want to go for a device with an outer casing as an outer layer of protection. Don’t try to place anything on your laser level, it may affect its balance and reading.

Interferences from Radiation and Vibrations Can Make Your Laser Level Insecure

Radiations and vibrations will naturally make your laser level insecure. When you mount your laser level on a device like a tripod or magnetic mount, you need to ensure that these supporting devices are not vibrating and they are not placed close to any vibrating substance. Similarly, you should avoid placing your laser level near any radiating substance. Radiations can cause an explosion when in contact with laser beams, hence you and other people nearby may be injured. Radiations can also affect your readings or measurements, hence you must avoid them by all means.

Interferences from External Signals Can Make Your Laser Level Insecure

External interferences can come in different forms against your laser level. For instance, external radio frequency signals on electronic devices and smartphones can affect the effectiveness of your laser level. Since the laser beam operates a certain wavelength, and radio frequencies also operate on another wavelength, there may be some collision that can either slow down or boost the distance covered by your laser lines. Make sure your phone lines and other electronic gadgets are either switched off or put off from your laser level when using the laser device. You don’t want to make false recordings for your leveling job.

The Class of Laser Level Shows How Dangerous It Can be

Whether you are using the top rated laser levels or low-end to a medium laser level, you should be aware of its class or category. Laser levels can come in Class 1, Class 2A, Class 3, and so on. The higher the class, the more dangerous the laser device is. Though a class 1 laser level is considered the safest for human use, the laser beam can still damage your eye when it comes in contact with it. You must wear your protective laser goggles and gloves when handling any type of laser to ensure that you are secured against accidents.

✪✪✪ See This Page: Best Exterior Laser Level - Indoor Outdoor Laser Level Comparison

Improper Calibration Can Make Your Laser Level Insecure

In addition to environmental hazards, radiations, and vibrations, improper or wrong calibration of your device can make the device insecure. The wrong calibration will not only bring bad results, but it can also expose your laser level; to some kinds of damages. Most laser levels do come with pre-calibrated settings and such default settings may not be ideal for some self-leveling jobs. You need to always check the calibration before you begin any new work. This rule also implies accessories used with your laser level. Check whether your grading rods have the measurements you need, for instance, some measure in meters and feet and some measure in inches, perhaps you should go for the accessories that measure in two or more units.

Improving the Security of Your Laser Levels- Steps to Take

In addition to proper calibration and protecting your device from radiations and vibrations, there are some steps you can take to secure your device on and off your work field. You must allow the device to dry properly before you store it. Even if your laser level comes with IP66 water-resistant body design, storing your device in an airtight environment with moisture can create a situation where water particles will enter the casing unit and cause damages.

Similarly, when using a laser level like a construction laser level in windy conditions, make sure you secure it to a well-balanced tool. If you place it on tripod sand, make sure the tripod legs are well spread and made to be nearer to the ground to create a strong base to hold and secure your laser level properly. Even with a strong tripod, some laser levels can still be blown away by a strong wind, it will therefore make more sense to avoid using a laser level when there is a strong wind.

Here are many other things included in a manual of your laser level that you need to check to practice and make your laser level more secured. The auto shut-off mode for instance must not be tampered with because it helps in shutting down your device after some minutes of no inactivity. The auto shut-off feature wouldn’t just secure your device, it will also help you conserve power and also prolong the lifespan of your laser level. Read The Best Outdoor Rotary Laser Levels For Construction to learn more about securing your laser levels and making the right choices of products.